EMB1061 BLE Module

EMB1061 is an embedded BLE module by MXCHIP. It integrates a BLE4.2 single mode SOC, including ARM Cortex-M0 Core, BLE/2.4G Radio, 24KB RAM, 160KB Flash and rich peripherals. EMB1061 uses half-hole package which is easy for soldering.
Hardware diagram is shown below with three main parts:
32-bit Cortex-M0 Core
BLE 2.4GHz RF
Power management
With:
Up to 16MHz ARM Cortex-M0 MCU with 24KB RAM , 160KB FLASH, UART,I2C,SPI,ADC,Timer/PWM
RF part: support PCB antenna or IPEX connector
Power management: DC3.3V power supply, operating voltage range: 1.7V~3.6V

Features
Based on an ultra-low power BLE SOC
- ARM Cortex-M0 Core 32MHz
- 24KB RAM
- 160KB Flash
Operating Voltage: 1.7V¡«3.6V

Bluetooth Features
- Support Bluetooth 4.2 (BLE single mode)
- Max TX power: 8dBm
- Min RX sensitivity: -87dBm
- Support BLE Master/ Slave mode
- Support broadcasting, data encryption,and adaptive frequency hopping
Operating Temperature£º-40¡æ to +105¡æ
Antenna: PCB antenna or IPEX connector (Optional)
Application
Intelligent lighting
Smart Home Application
Wearables
Smart healthcare
Portable devices
Operating Conditions
EMB1061 would be unstable when input voltage is less than the lowest rated voltage. Range of input voltage:
Symbol Illustration Condition Details
Minimum Typ Maximum Unit
VDD Power Supply ¡¡ 1.7 3.3 3.6 V
There would be permanent damage in hardware if the device operates at the voltage over rated value.
Meanwhile, reliability could be influenced when the device has a long-term operating at maximum voltage.
Absolute maximum voltage rating:
Symbol Description Minimum Typ Unit
VDD Module input voltage ¨C 3.8 V
VIN GPIO input voltage ? 3.8 V
Power Consumption:
Mode Description Average Max
TA=25¡ãC TA=25¡ãC
EMB1061
Power consumption CPU_HALT CPU running halted, all peripherals keep running and can wake up CPU by interrupt/event. 2.49mA 2.63mA
Advertisement
(TIMER_SLEEP
ON) Advertise every 1.28s, keep in TIMER_SLEEP mode between the advertisement intervals. 19.53uA 8.43mA
Connected Keep connected with other BLE device, communicate every 50ms, and keep in TIMER_SLEEP mode between the communication intervals. 138.96uA 8.39mA
Scanning Scan every 1.28s, and kee in TIMER_SLEEP mode between the scan intervals. 568.75uA 8.26mA
Sleep TIMER_SLEEP ON
CPU and all peripherals OFF, internal slow RC clock and wakeup pins ON
Can be waked up by internal RTC or wakeup pins(IO9/10/11/12/13).
Wake up every 10s in this test. 3.54uA 2.76mA
Standby CPU and all peripherals OFF Wakeup pins ON
Can be waked up by wakeup pins
(IO9/10/11/12/13). 375.98nA 2.68uA
Working Environment:
Symbol Name Maximum Unit
TSTG Storage Temperature -40 to +110 ¡æ
TA Operation Temperature -40 to +105 ¡æ
Humidity Non-condensing, Relative humidity 95 %
Electrostatic Discharge:
Symbol Name Details Level Maximum Unit
VESD(HBM) Electrostatic discharge voltage
(Human Body Model) TA= +25 ¡ãC , JESD22-A114 2 2000 V
VESD(CDM) Electrostatic discharge voltage
(Charged Device Model) TA = +25 ¡ãC , JESD22-C101 II 500


Part List
EMB1061 BLE Module x 1